866-292-7736
Menu
新葡京博彩官网 VisionLink 部分.猫.com 我的位置 新葡京博彩官网

623K轮式拖拉机铲运机

首页 | 新葡京博彩官网设备 | 猫的机器 | 提高刮刀 | 623K轮式拖拉机铲运机

623K轮式拖拉机铲运机

360°外视

快速加载, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing 猫 轮Tractor-Scrapers to consistently deliver high productivity ...
新葡京博彩官网
PDF 打印 分享

引擎

飞轮动力-拖拉机/刮板
304 kW (407 hp)
请注意
C13发动机的排放量相当于美国.S. 美国环境保护署第2级/欧盟第II阶段.S. EPA Tier 3/EU第三阶段.
发动机模型
猫C13
飞轮动力-拖拉机
407HP
发动机额定转速
2000 r / min

刮碗

刮板容量-堆积
23码³

传输

最高速度-加载
33.5英里/小时

维

高度-整体运输
158.9in
长度-整机
542in
宽度-整机
141.1in
高度-驾驶室顶部
142.6in
高度-刮板叶片最大值
20.5in
宽度-拖拉机
133.1in
宽度-碗的内部
120in
宽度-外后轮胎
128.9in
拖拉机前部到前轴
122.8in
轴距
329.5in
后桥-机器的后部
89.7in
离地间隙-拖拉机
21.9in
宽度-后轮胎中心
90.2in
轴到垂直结销
17in
高度-电梯顶部
148.3in
宽度-整机-下梯
149.2in

服务补充容量

油箱
216.09年加(美国)
曲轴箱
8.08年加(美国)
冷却系统
11.89加(美国)
传输系统
24.76加(美国)
液压系统
21.926加(美国)

旅行速度-跳动

变速箱- 8档
33.5英里/小时
变速箱-五档
13.6公里/小时
传动齿轮-第一档
3.1英里/小时
变速箱-四档
10.1英里/小时
变速箱-倒挡
5.7英里/小时
传动齿轮-秒
5.5英里/小时
变速箱-第七档
24.8英里/小时
变速箱- 6档
18.4英里/小时
变速箱-三档
7.5英里/小时

安全准则及遵从标准

转向系统
ISO 5010:2007
安全带
SAE J386: JUN1985
翻滚保护结构(ROPS)
ISO 3471:2008最高17084公斤(37664磅)
倒车报警器
ISO 9533:2010
坠落物防护结构(FOPS)
ISO 3449:2005二级
刹车
ISO 3450:2011

出租车

罗普/防落物
符合ISO标准
外部声级
The exterior sound power level for the standard machine (ISO 6393) is 111.5 dB (A).

一般

宽度-切割
10.3ft
最高速度-加载
33.5英里/小时
轮胎-刮板
33.25R29**E3
刮板容量-敲击
18.8码³
刮板容量-堆积
23码³
额定负载
25 038 kg (55,200 lb); 25.1公吨(27).6吨)
总宽
11.71ft
总船身高度
12.37ft
总长度
45.18ft
操作重量-空
88061lb
最大扩散深度
18.3in
最大切割深度
10.3in
油箱补充能力-刮刀
201加(美国)
180°路边转弯宽度
38.71ft
电梯飞行间距
20in
最大楼层开口
4.4ft
航班数量
15
轮胎-拖拉机驱动
33.25R29**E3

实施周期

碗低
3.5s
碗提高
3s
喷射器扩展
6.45s
喷射器收缩
9.7s

更有效率

更有效率
  • 高达7%的额外电梯扭矩.
  • 链条寿命提高50%以上.
  • 增强电梯驱动链轮，减少链条磨损.改进了剪刀式链条张力系统，降低了张力
    链轮磨损、链条磨损、跳链.
  • 猫C13 engine offers increased power density with a combination
    经过验证的电子，燃料和空气系统.
  • Use Ground Speed Control to set the desired top speed, and the
    machine will find the gear that works best for the engine and the
    变速箱，提供更低的燃油消耗.
    • The Machine Speed Limit feature replaces 前 Gear Selection.
  • Advanced Productivity Electronic Control System (APECS) allows
    the engine and transmission to communicate on a high level. 这
    communication allows the machine to better utilize the power
    以及发动机产生的扭矩. 最终的结果是运动得更多
    材料.
  • Auto-Stall assists in quickly bringing the transmission to an
    operating temperature at start-up when the machine is working in a
    寒气区.
  • 猫 Payload Estimator for scrapers is an earthmoving solution for
    最佳载荷和现场效率. Payload Estimator achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Payload Estimator is optimized to be used with Sequence Assist, which provides increased productivity with less operator effort.

舒适地工作

舒适地工作
  • Reduce up to 14 individual operator commands per cycle with
    序列辅助(可选附件).
  • Steer with less effort using the newly designed high-pressure
    转向系统.
  • 享受内部改进和更符合人体工程学的工作
    环境，驾驶室比G系列驾驶室大21%.
  • Intuitive, ergonomic 控制s keep operators focused on their work.
  • Maintain desired cab temperature with automatic temperature
    控制.

为安全而设计

为安全而设计
  • 刹车 are hydraulically actuated wet disc brakes for the tractor
    和刮板.
  • Get in and out of the cab easier with the new powered access
    梯子系统(可选附件).
  • Enhance an operator’s awareness of site surroundings with the
    可选工作区视觉系统(WAVS).
  • Seat belt indicator provides visual and audible alerts when the seat
    皮带未澳门新葡京博彩.
  • Ground level, engine shut-off switch stops all fuel to the engine
    当激活并关闭机器时.
  • Advanced Cushion Hitch allows the cushion hitch to prevent
    end stroke by having the ability to predict end stroke events
    and manage the rate of dampening, resulting in reduced hitch
    maintenance and improved operator ride in rough conditions.

操作方便

操作方便
  • The spacious cab features easy, intuitive 控制s and excellent
    可见性. 为驾驶室提供了舒适的工作环境
    全天的操作.
  • 猫 Advanced Ride Management (ARM) seat suspension reduces
    end stroke movement of the load cylinder for a smoother ride.
  • 引擎 overspeed protection will automatically engage with no
    当机器在八档时，操作员输入. 这台机器
    will assist in slowing the machine speed by canceling the throttle
    命令并啮合发动机压缩制动器.

集成cat技术

集成cat技术
  • 监督，管理和提高现场操作.
  • Hit target grade faster and more accurately with 猫 GRADE technologies. Finish jobs in fewer passes and with less operator effort, 节省您的时间和帮助增加利润.
  • Product Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).
  • 随时获取信息, anywhere with Vision Link®– use it to make informed decisions that boost productivity, 更低的成本, 简化维护, 提高工作现场的安全保障.
  • Shorten the learning curve for inexperienced operators with Load Assist (optional attachment).

执行效率

执行效率
  • The new tractor hydraulic on-demand fan helps assist in lower fuel consumption.
  • 卡特C13拖拉机发动机的排放量相当于美国.S. 美国环境保护署第2级和欧盟第II阶段.S. EPA Tier 3和欧盟IIIA阶段，有助于降低燃料 .
  • Using draft-arm overflow guards diverts 材料 away from the bowl, preventing 材料 from getting caught between the draft arms and the bowl sides.
  • 猫 Grade Control (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.